|
인스톨 환경에 적합하도록 설계된 CDi Series는 출력에 따라 CDi 1000, CDi 2000, CDi 4000으로 구분되고 있습니다. 세 제품 모두 중량이 가볍다는 장점을 지니고 있으며, XTi의 모든 모델들은 앰프의 컨디션을 체크할 수 있는 LCD 스크린을 탑재 하였습니다.
크로스오버, EQ, 리미터, 딜레이, 서브 하모닉 신시아이저와 DSP 스피커 프로그램이 내장되어 있습니다. 이밖에 통합 파워 서플라이, 앰프 컨디션을 체크 할 수 있는 레벨 인디케이터, 쿨링 팬 시스템, XLR 입력과 Speakon? 입력과 회로 쇼트 방지 기능들이 내장되어 있습니다.
제품스팩
| Minimum Guaranteed Power |
CDi 1000 |
CDi 2000 |
CDi 4000 |
CDi 6000 |
| Per channel, both channels driven |
| 2 ohm Dual (per channel) |
700W* |
1,000W* |
1,600W* |
3,000W* |
| 4 ohm Dual (per channel) |
500W |
800W |
1,200W |
2,100W |
| 8 ohm Dual (per channel) |
275W |
475W |
650W |
1,200W |
| 4 ohm Bridge-Mono |
1,400W* |
2,000W* |
3,200W* |
6,000W* |
| 70V Dual (per channel) |
500W |
800W |
1,000W |
2,500W* |
| 140V Bridge-Mono |
1,000W |
1,600W |
2,000W |
5,000W |
| With 0.5% THD |
| *With 1% THD |
| Specifications |
| |
| Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB |
| Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) |
100 dB |
| Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500 |
| Input Stage |
Input is electronically balanced and employs |
| precision 1% resistors |
| AC Line Current |
CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A |
| At idle: Draws no more than 45 watts. |
| Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB |
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced |
| Load impedance (note: safe with all types of loads) |
2–8 ohms |
| Dual |
4–16 ohms |
| Bridge mono |
|
| Voltage Gain (at 1 kHz, 8 ohm rated output) |
CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB |
| Sensitivity (at 8 ohm rated output) |
1.4V |
| Maximum Input Signal |
+22 dBu typical |
| Operating Temperature |
0° C to 40° C at 95% relative humidity (non-condensing) |
| AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V-240V, 50/60 Hz |
| Ventilation |
Flow-through ventilation from front to back |
| Cooling |
Heat sinks and proportional-speed fan |
| Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19 in. Wide (EIA RS-310-B) |
| x 3.5 in. (8.9 cm) High x 12.25 in. (31.1cm) Deep |
| CDi 6000 is 16.2 in. (41.15 cm) deep. |
| Net Weight |
CDi 1K, 2K, 4K: 19 lb (8.6 kg). |
| CDi 6K: 24 lb (10.9 kg). |
|
